INSTRUCTIONSOperate this product only as specified in this manual described and observe all safety instructions. Misuse can cause injury.
This device must not be used by children. Keep the unit and its connecting cable out of the reach of children.
Children must not play with the appliance. They do not recognize the Danger that can arise when working with electrical equipment.
This unit can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge when they have been given supervision or instruction concerning the safe use of the device and understand the resulting risks.
Check that the switch is turned OFF before inserting the plug into the socket. Adjust the slice thickness as desired by turning the handle to the appropriate position. Place the food on the carriage and turn the slicer ON. For best performance, move the carriage backwards and forwards smoothly and do not press the meat too hard against the blade.
The duration of your forwards/cutting stroke should be 2-3 seconds. The duration of your backwards stroke should be at least as long as the duration of your forwards/cutting stroke, and in any case at least three full seconds or longer.
This appliance must be used with the sliding feed table and the piece holder in position unless this is not possible due to the size or shape of the food.
Turn the unit off and disconnect it from the power supply when you leave the unit unattended before attaching or removing accessories, and before cleaning.
This appliance conforms with the Ministerial Decree 10/04/1984 (EEC Directive 82/499) concerning the elimination of radio disturbances.
When using the slicer, always hold the food against the sliding carriage. Use the food press to hold the food against the blade, unless this is not possible due to the size or shape of the food.
This electric slicer has been designed to operate for short periods (max 10 min.)
Switch off the appliance before changing accessories or approaching parts that move in use.
If the mains cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazards.
CleaningAlways unplug the slicer and turn the slice-thickness handle to the zero position before cleaning. NEVER IMMERSE THE UNIT IN WATER, as this would damage the electrical components. Surfaces in contact with food should be cleaned with a slightly damp, lint free cloth.
Cleaning the BladeCaution: the blade is extremely sharp – please take proper care, otherwise there is a risk of serious injury.
The stainless steel blade can be cleaned with a slightly damp, lint free cloth.